Chimney Repairs and Lead Flashing Work in Ollerton
Chimneys on older Ollerton cottages and larger detached homes do a lot of quiet work, and they rarely get looked at until something drops into the garden. They stand high, they are exposed to wind from every side, and the lead that seals them to the roof gets little attention. Even a modest crack in the mortar can let water into the brick, which can then crumble in cold weather.




We repair chimney stacks, pots and flashings in Ollerton and nearby villages. Where a house has a mix of tiles, slate and flat-roofed extensions, the chimney often sits at a junction of several materials, which is where leaks tend to start. A stain on the ceiling near the chimney is not always the stack itself, but it is a sensible place to begin looking.
From repointing to rebuilding
The simplest job is repointing: removing defective mortar where appropriate and renewing the joints in suitable materials. If the brickwork itself has cracked, loosened or weathered badly, local repairs are possible, and a stack that has moved may need partial or complete rebuilding after a structural assessment.
Chimney pots and cowls can be replaced, as long as they suit the flue or appliance. The mortar crown and flaunching that holds pots in place can be repaired when it has cracked.
- Chimney repointing
- Brickwork repairs
- Partial and complete rebuilding
- Lead aprons, soakers and stepped flashings
- Pots, cowls and flaunching
- Chimney leak investigation
Finding the real source of a leak
A damp chimney breast does not always mean the stack is at fault. It can come from failed lead, nearby tiles, a cracked crown or the brickwork. Larger properties with more roof need a proper look before deciding what to repair.
Send a photo of the chimney or call us, and we can arrange a quote.
Chimney Repairs and Leadwork: examples
Illustrative images of the systems and repairs involved. See the full gallery.
Chimney Repairs and Leadwork near Ollerton
Chimney Repairs and Leadwork in Ollerton: common questions
Is a leaning chimney dangerous?
A lean can mean the stack is unstable, so it should be looked at promptly instead of waiting. Waiting for pieces to fall is the more expensive route and a risk to anyone below. We assess it and say whether a repair or a rebuild of the upper section is needed.
Do I need a new cowl?
Only if the old one is damaged, or if the flue is no longer in use and needs capping suitably. Cowls must be compatible with any appliance, so tell us how the chimney is used. If a fireplace is no longer in use, a vented cap can be a sensible choice, and we can discuss it.
Chimney Repairs and Leadwork quote in Ollerton
Tell us about the job. Photos on WhatsApp help us understand what is needed.
Request a quote
Tell us what is happening with your roof and we will come back to you.
